
Nano (USB)
802.11 G USB Transceiver
Works for all Apple Products with USB
$91
|

Quicky™ 500mW USB Transceiver for 802.11
G - For MacBooks, iBooks, PowerBooks, etc.
$316
|

Quicky Jr ™
100mW USB Transceiver for 802.11 G - For MacBooks, iBooks, PowerBooks,
etc.
$154
|
|
The Quicky Jr's Junior
It just doesn't get any easier than this. You can now connect
your 'Book to just about any wireless network, especially those
that are further away from your normal range and still get a fast
connection. Nano USB plugs into your Mac's USB port - so it's
easy to install and use. You can take it with you and use it anywhere
you want better wireless. That means you can not only see more
wireless networks, but when you decide to connect, you'll also
get high speeds that make wireless networking as solid as being
connected using a network cable. This works best for PowerBook
G4s which have metal casing and sub-par wireless reception.
|
500mW of Power
It just doesn't get any easier than this. You can now connect
your 'Book to just about any wireless network, especially those
that are further away from your normal range and still get a solid
and fast connection. Quicky™ plugs into your Mac's USB port
- so it's easy to install and use. You can take it with you and
use it anywhere you want better wireless. The antenna and transceiver
help the Quicky™ boost your wireless RF power from a stock
30 milliwatts to 500 milliwatts - at least ten times the wireless
power. That means you can not only see more wireless networks,
but when you decide to connect, you'll also get high speeds that
make wireless networking as solid as being connected using a network
cable.
|
You have a 30mW wireless card (transciever)
in your Mac
We decided antenna installation is no fun. So we made this instead.
The Quicky Jr. will boost your wireless signal and reception.
It is a far cry from our Quicky, which has a 500 mW (milliwatt)
transceiver, but this will get the job done if you are having
trouble getting a constant wireless signal. The Quicky Jr. contains
a 100mW transceiver and connects using the USB port. The software
is the same as that for the Quicky, so installation is easy.
|
|